Easy to operate DRC-300

•  Sealed multi-layer paper bag.
• The spiral sliding edge technology creates consistent, reliable, and attractive heat sealing.
• A patented separation design eliminates bag blockages caused by expensive downtime, while facilitating the cleaning and maintenance of the folding device.
• A safe and easy-to-use control panel with digital temperature control and variable speed control display keyboard, as well as dual emergency stop buttons.
• Operate from right to left.
• Dynatech hot melt adhesive applicator.
• Double knife bag top trimming.

 

 

 

Here is the translation of the steps for using a Heat Sealing Machine:

1.Preparation:


2.Ensure the heat sealing machine is on a stable work surface and properly connected to power and ground. Check that all safety features of the machine are functioning correctly.


3.Temperature Adjustment:


4.Adjust the temperature of the heat sealing machine according to the packaging material being used (such as plastic bags, aluminum foil bags, etc.). Temperature adjustment is typically done using a control panel or knobs to ensure a good seal.


5.Prepare Packaging Material:


6.Place the packaging material that needs to be sealed inside the sealing area of the heat sealing machine. Ensure the material is flat without wrinkles or other obstacles.


7.Start Sealing:


8.Start the heat sealing machine and wait for the preheating time to complete (if applicable). Position the sealing area over the intended sealing position. Ensure the sealing bar makes close contact with the packaging material.


9.Perform Sealing:


10.Press the sealing button or lower the sealing head to apply heat and pressure. The sealing time is usually preset or adjustable to ensure a secure seal.


11.Complete Sealing:


12.Once sealing is finished, release the sealing head and allow a moment for the seal to cool and set. Remove the sealed packaging material and proceed to the next sealing position or operation step.


13.Clean and Maintain:


14.After sealing operations, turn off the heat sealing machine and clean the sealing area to remove any residue or material fragments. Regular cleaning and maintenance of the heat sealing machine help maintain its performance and longevity.


15.Safety Operation:


16.Practice safety protocols while using the heat sealing machine, avoiding contact with hot surfaces or potential electric hazards. Wear appropriate safety gear such as gloves or goggles to ensure personal safety.