 

Good material Wrapping paper tape

Jenis bayaran: pay in advance

Pengangkutan: Air,Express

dapatkan harga terkini

Hubungi sekarang

Atribut Produk



Atribut Produk

Model No.: Wrapping paper tape

7 Days Quick Proofing: Support

Characteristic: Abrasion Resistance, High Tenacity, Low Shrinkage, High Temperature Resistant, Water Resistant

Pembungkusan & Penghantaran
Unit Jualan	:	others

Penerangan produk



Calssification keywords: High Quality Wrapping paper tape
Category name: Consumable Materials
Main products:Wrapping paper tape
Here are the steps for using Wrapping paper tape :

1.Preparation:

2.Ensure the heat sealer is powered on and properly preheated to the appropriate temperature.
3.Prepare the packaging materials that need to be sealed and the corresponding Wrapping paper tape.

4.Adjust the Heat Sealer Settings:

5.Adjust the temperature and sealing time of the heat sealer based on the type and thickness of the packaging materials. Refer to the operating instructions of the heat sealer for proper settings.

6.Prepare the Packaging Materials:

7.Place the packaging material to be sealed under the sealing element of the heat sealer, ensuring that the edges are aligned.

8.Apply Wrapping Paper Tape:

9.Apply the Wrapping paper tape over the opening of the packaging material, ensuring it covers the sealing area evenly. Cut the tape to the desired length if necessary.

10.Sealing Operation:

11.Operate the heat sealer to apply heat to the sealing area according to the set temperature and time. The heating element of the sealer will heat the Wrapping paper tape, bonding it to the surface of the packaging material.

12.Complete the Seal:

13.Wait for the sealing process to complete. The heat sealer may signal or indicate when the sealing is finished.
14.Stop the operation of the heat sealer and remove the sealed packaging material.

15.Inspect Seal Quality:

16.Check the sealed area to ensure the Wrapping paper tape is securely bonded to the packaging material without any cracks or leaks.

17.Clean-Up and Maintenance:

18.Turn off the heat sealer and clean its surface, ensuring it is ready for the next use.